ELECTRIC RIFLE
POLYMER RECEIVERS
POLYMER KEYMOD HANDGUARD WITH 20mm UPPER AND UNDER BARREL RAILS
UPPER CARRYING HANDLE WITH 20mm STANDARD RAIL
FOLDING STOCK
ELECTRIC BLOWBACK SYSTEM
350 ROUNDS HI-CAP POLYMER MAGAZINE
ADJUSTABLE SIGHTS
BATTERY COMPARTMENT INSIDE HANDGUARD
MINI-TAMIYA PLUG
LENGTH 500mm - 715mm
WEIGHT 2720g
BATTERY AND CHARGER NOT INCLUDED

THE WELL-KNOWN ON THE AIRSOFT MARKET SPECNA ARMS PRESENTS SA-G SERIES!
SA-G REPLICAS WITH THEIR LEVEL OF CRAFTSMANSHIP CAN COMPETE WITH REPLICAS BY TOP MANUFACTURERS!
G-SERIES CONSISTS OF CARBINES IN SEVERAL INTERESTING CONFIGURATIONS, INCLUDING MODELS EQUIPPED WITH AN INTEGRATED SCOPE, BIPOD OR A KEYMOD HANDGUARD.

THE REPLICA, SIMILARLY TO THE ORIGINAL, WAS MADE OF DURABLE POLYMER, METAL AND, IN THE MOST VULNERABLE PLACES, STEEL (STEEL PARTS INCLUDE SCREWS, PINS AND TACTICAL SLING ADAPTERS).
THE REPLICA IS EQUIPPED WITH A FORWARD RIS 22mm RAIL (ON TOP AND IN THE BOTTOM) AS WELL A KEYMOD MOUNT (ON THE SIDES).
THE HANDGUARD CONTAINS THE BATTERY.

THE REPLICA IS CHARACTERISTIC FOR ITS VERY GOOD ALIGNMENT OF PARTS AS WELL AS THE FACT THAT IT WAS MADE OF MATTE POLYMER.
THE MORE IMPORTANT ELEMENTS WERE JOINED WITH PINS.
THIS WAY SPECIFIC ELEMENTS CAN BE CHANGED, FOR INSTANCE, THE MAGAZINE WELL.
THE RECEIVER OF THE REPLICA MADE OF SOLID POLYMER FEATURES AN INDIVIDUAL SERIAL NUMBER, MANUFACTURER MARKINGS AND AESTHETIC FIRE MODE SELECTOR SYMBOLS.
THE TOP OF THE REPLICA FEATURES A CLASSIC TRANSPORT HANDLE WITH A RIS 22mm RAIL AS WELL AS ADJUSTABLE, FIXED IRON SIGHTS.
THE REPLICA FEATURES A STOCK FOLDABLE TO THE SIDE, WHICH SIMPLIFIES THE TRANSPORTATION AND OPERATING IN TIGHT CORNERS.
THE METAL BARREL FEATURES A FLASH HIDER MOUNTED ON A 14mm CW THREAD.

THE HEART OF THE REPLICA CONSISTS OF A LIPO READY GEARBOX V3 WITH AN INSTALLED MICRO-CONNECTOR.
THE GEARBOX IS FULLY ADJUSTED FOR MODIFICATIONS AND THE IMPLEMENTATION OF A MICRO-CONNECTOR POSITIVELY INFLUENCES THE TRIGGER REACTION SPEED AND RATE OF FIRE OF THE REPLICA. 

THE REPLICA IS FULLY COMPATIBLE WITH LIPO AND LIFE BATTERIES.
DUE TO A BASE MUZZLE VELOCITY OF ~380 FPS PROVIDED BY THE MAIN SPRING INSTALLED BY DEFAULT BY THE MANUFACTURER, THE REPLICA IS PERFECT FOR OPERATING ON A MEDIUM RANGE. 

THE REPLICA FEATURES A QUICK SPRING RELEASE SYSTEM - ENTER & CONVERT.
IN ORDER TO GAIN THE ACCESS TO THE GEARBOX, ALL THAT IS NECESSARY IS TO REMOVE THE PIN LOCATED IN THE LATCH BLOCKING THE STOCK.
IN THIS WAY, THE ACCESS TO THE MAIN SPRING GUIDE IS GAINED, WHICH CAN BE QUICKLY AND EASILY PULLED OUT THROUGH THE BACKSIDE OF THE GEARBOX.
DUE TO THAT SYSTEM, IT IS POSSIBLE TO RAPIDLY AND QUICKLY ADAPT THE POWER OF THE REPLICA TO THE CONDITIONS EXPECTED ON THE PLAYING FIELD WITHOUT THE NECESSITY TO HAVE THE ACCESS TO A WORKSHOP OR A SET OF SPECIAL TOOLS.
THE ENTIRE SPRING EXCHANGE LASTS 45 SECONDS AND REQUIRES ONLY A SINGLE SCREWDRIVER. 

THE REPLICA, SIMILARLY TO THE ORIGINAL, WAS ADAPTED FOR USE BY BOTH LEFT- AND RIGHT-HANDED USERS THANKS TO A DOUBLE-SIDED FIRE MODE SELECTOR PLATE. 

THE REPLICA USES AN INTERESTING SOLUTION IN THE FORM OF EBB (ELECTRIC BLOW BACK) SYSTEM THAT SETS THE BOLT CARRIER INTO MOTIONS, INCREASING THE REALISM AND BRINGING IT CLOSER TO THE LIVE FIREARM ORIGINAL. 

THE SET INCLUDES A HI-CAP MAGAZINE WITH A CAPACITY OF UP TO 350 BBS. 

EVERY REPLICA UNDERGOES, AS EARLY AS STILL IN THE FACTORY, A PRE-DELIVERY INSPECTION VALIDATED BY A SPECIAL CERTIFICATE WITH A HOLOGRAM AND AN INDIVIDUAL SERIAL NUMBER ASSIGNED TO EVERY REPLICA.